6 Port / 2 Position diverter/selector valves are designed to be used when additional hydraulic functions are required on machines such as agricultural equipment, material handlers, construction equipment and in pilot control systems. The valve bodies are made from cast iron which is machined to precise tolerances. The inner components are made of hardened and ground steel. The spool is operated by a manual lever which features a DETENT mechanism.

Features a “Closed Centre” spool crossover function. When the solenoid valve is energised, all ports will be closed intermittently as the spool transitions.

NOTE: The “Drain Port” must be connected when the valve is used in applications above 150 BAR (2175 PSI)

Maximum Pressure = 250 BAR (3625 PSI)

Maximum Flow = 50 LPM (13 GPM)

Working Port Threads = 1/2″ BSPP

Drain Port Threads = 1/4″ BSPP

Oil Cleanliness = ISO4406 class 20/18/15 (NAS1638 class 9)

Dimensions and specifications can be found in the pictures

Note: The plumbing diagram in the pictures may not be accurate to actual valves ports. Please confirm connections via the manufacturers datasheet. If unsure, please contact us.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.