These THROUGH SHAFT PTO Gearboxes will allow you to add a hydraulic pump to your machine and sustain the 6 Tooth Splined Shaft Output. The primary function of these gearboxes is to increase the output speed of your tractors PTO (Power Take Off). This will enable you to drive hydraulic pumps and maintain your regular output. Excellent for applications where you would like to add hydraulics to the machine but still use other PTO attachments at the same time. This gearbox is rated to a maximum of 37kW of hydraulic power. Pump displacement and system pressure must not exceed this, or premature failure of the gearbox will occur. Newland Fluid Power can easily perform the calculations required to find the PTO Gearbox most suited to your application.

Suitable Pump Sizes:

DIN Group 2 Hydraulic Gear Pumps with 1:8 Taper Shafts (Standard 1/8″ Or 4mm Vivoil Shaft Key)

DIN Group 3 Hydraulic Gear Pumps with 1:8 Taper Shafts

SAE A Group 2 Hydraulic Gear Pumps with 5/8″ 9 Tooth Splined Shafts

SAE B Group 3 Hydraulic Gear Pumps with 7/8″ Keyed or 7/8″ 13 Tooth Splined Shafts

Gearbox Ratio = 3:1

Gearbox Shaft = 1.3/8″ 6 Tooth Spline (Male or Female)

Available Inputs = Extended Male Shaft, Extended Female Shaft or Extended Female Shaft with Quick Release

Gearbox sizes and dimensions can be found in the pictures.

Additional information or any questions, please contact us.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.