With the SV series cartridge shuttle valve it is possible to select the one with higher pressure between two lines and convey it on a third way to perform, for example, hydraulic piloting or logic sequences. Typical employment for load shuttle valves is into load sensing circuits where they select the line with highest load and send the signal to the compensator. The SV series’ valves are available with two different sizes with so many working flow rates. For size 08, suitable for standard SAE08/3 cavities, the recommended flow rate is up to 15 l/min (4 US gpm); for size 10, suitable for standard SAE10/3 cavities, the recommended flow rate is up to 30 l/min (8 US gpm). Maximum working pressure for valves of SV series is 350 bar (5075 PSI). The cartridges, dimensioned according with the SAE standard, allow to easily fit the valves SV series into the most common hydraulic manifolds. External components, built with high resistance steel, are protected against the oxidation by zinc plating treatment

Cartridge Cavity = SAE 08-3

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.