The Oleoweb EC series electric valves utilise the magnetic field created by an electric coil and transform it into a mechanical action. The force allows the opening or closing of the valve, allowing or interrupting the flow passage. This listing is for the normally open (NO) configuration (valve open in absence of power supply).

Typical application of these valves is the unloading function: a normally open valve discharges the pump flow, preventing movement of the actuators until an electrical impulse closes the passage to tank, making the flow available for use. For the NC version an emergency command is also available for manual opening of the valve in the event of an interruption of the electrical signal. The presence of a poppet and a sealing seat allows the valves to be used as check valves able to support a load thanks to the absence of leakage when closed.

These valves are double-sealed; the block valve function is possible in both directions (Refer to hydraulic technical data).

Available in either SAE08-2 or SAE10-2 cavities.

Maximum Pressure = 350 BAR (5075 PSI)

Maximum Flow Rate = 40 LPM (5.8GPM) to 70 LPM (10.5 GPM)

Note: 12V or 24V DC Solenoid Coils are sold separately. Aluminium or steel manifolds/housings are available, these are also sold separately.

This listing is for the cartridge only.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.