VARP Series pressure reducing valves, manufactured in Italy by OFC Villa Hydraulics

Pressure reducing valves reduce a high primary pressure at the inlet (port P) to a constant reduced pressure at port C. Tank port (T) must be connected to a return to tank line. Full reverse flow from reduced pressure (port C) to inlet (port P) is achieved via use of the reverse flow check valve incorporated into the design.

Note: This valve has no relieving capability. It should not be used in a dead-headed application. If the reduced pressure side of the circuit has very low leakage the pressure may rise significantly. The pressure rise will vary from valve to valve.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.