Oleoweb STUF series needle valves regulate the oil in one direction and have full free flow in the reverse direction. The valves do not have an integrated hydraulic compensator and the set flow is effected by the pressure drops across the valve. The valves can be easily installed inline inside the hydraulic circuit through the two BSP threaded ports. Depending on the chosen size, the STUF valves can be installed inside circuits with max working pressure of 400 BAR (5800 psi) and flow up to 300 LPM (79.2 gpm) The external body is made by steel and it is protected from oxidation by zinc plating treatment. The inner components are made of steel , hardened and ground where necessary. The knobs are made of aluminium.

Note: Optional Panel Mount Nuts Available (Check pictures)

Variations and performance information can be found in the pictures.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.