Let MOCEN power your next hydraulic solution!

Mocen Micro Series DC Power Packs are equipped with external gear pumps together with efficient DC electric motors. These power units offer high volumetric efficiency and high quality mechanical characteristics along with excellent balancing, and therefore reduced noise and vibration. They feature a high degree of accuracy and have a wide application range, both commercial and industrial. Commonly found in aerial platforms, car hoists, dock levellers, material handlers, parking storage systems, scissor lifts, security gates, tail lift trucks and tipper trays.

Suitable for intermittent use only

Available with 3 standard valve configurations:

• P + T = 1x Pressure Port & 1x Tank Return Port, this type of power unit is for connection to additional valves and components.
• S/A (Single Acting) = 1x Pressure Port and 1x Solenoid Cartridge Valve, this type of power unit is for single acting cylinder applications, such as hoists and tipper trays.
• D/A (Double Acting) = A & B Port for double acting cylinder or hydraulic motor applications. This model comes with a single CETOP 3 Closed Centre Valve.

Power Unit Specifications:

DC Motor Power = 12V 350W, 40a, 1700 RPM, 3% of 2min duty cycle OR 24V 350W, 25a, 1800 RPM, 3% of 2min duty cycle

Pump = 0.38cc

Maximum Pressure = 205 BAR (3000 PSI)

Relief Factory Setting = 170 BAR (2500 PSI)

Flow = 0.7 LPM

Tank Volume= 1.4 Litres

Ports = 9/16″ UNO

Note: Solenoid Coil Voltage matches Electric Motor Voltage on S/A & D/A Models

Other Tank Volume Sizes Available, they can be found in “DC Power Unit Parts & Spares”. Contact us for a custom quote.

Complete range of spare parts available.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.