The FAI FILTRI CS Series are economical, low pressure filters with spin-on convenience and a wide range of cleanliness ratings and sizes to cover several flow rates. They can be used in both return and suction line configurations in hydraulic systems. The entire range meets international filtration standards and can be cross referenced with a wide range of other brands.

Filter Can Outside Diameter = 5″ (126mm)

Can Thread = 1.1/4″ BSPP or 1.1/2″ UNF

Filter Can Maximum Pressure = 175 PSI (12 BAR)

Micron Ratings = 3μm – 90μm (Reference Table Below)

When selecting the filtration medium, consider the pressure losses:
• Between 0.05 & 0.1 bar for suction line
• Up to 0.3 – 0.5 bar for filters fitted on return line

FILTREC CROSS REFERENCE

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.