6 Port / 2 Position diverter/selector valves are designed to be used when additional hydraulic functions are required on machines such as agricultural equipment, material handlers, construction equipment and in pilot control systems. The SSV series is stackable, which allows up to 4 valves to be connected together with a single supply. The pressure drop increases as more valves are stacked (banked), this performance information can be found in the pictures or datasheet. The valve bodies are made from cast iron which is machined to precise tolerances. The inner components are made of hardened and ground steel. The spool is operated by a high performance solenoid coil, available as either 12 Volt or 24 Volt Direct Current (DC).

Features an “Open Centre” spool crossover function. When the solenoid valve is energised, all ports will be connected intermittently as the spool transitions.

Maximum Pressure = 250 BAR (3625 PSI)

Maximum Flow = 80 LPM (21 GPM)

Solenoid Voltage = 12 Volt or 24 Volt DC

Working Port Threads = 1/2″ BSPP

Dimensions and specifications can be found in the pictures

Note: The plumbing diagram in the pictures may not be accurate to actual valves ports. Please confirm connections via the manufacturers datasheet. If unsure, please contact us.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.