DDF Series 3 Port diverter valves are used for the diversion of oil flow towards two different outlets. The diverter valves are made of cast-iron and the inner components are made of hardened and ground steel.

Available with 2 different spool types, either open or closed centre.

Open Centre = When the valve handle is moved through the transient positions, all ports will be open to each other

Closed Centre = When the valve handle is moved through the transient positions, all ports will be closed off to each other

All HV Diverter Valves are supplied painted black from the factory.

Maximum Pressure = 300 – 350 BAR (4350 – 5000 PSI)

Maximum Flow = 60LPM – 200 LPM (15 – 52 GPM)

Thread Sizes Available:

• 3/8” BSPP
• 1/2” BSPP
• 3/4” BSPP
• 1” BSPP

Dimensions and specifications can be found in the pictures.

WARNING – IMPROPER USE OR SELECTION OF THE PRODUCTS/EQUIPMENT OR SYSTEMS DESCRIBED CAN CAUSE PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE. SAFETY PROCEDURES MUST BE APPLIED PRIOR TO INSTALLATION, COMMISIONING AND/OR OPERATION OF EQUIPMENT AND MACHINERY.